Brady POWERMark User Manual page 85

3) For the Starting point option, type the sequenced number(s) or letter(s) for the first
label you want printed.
You can enter a number between 0 and 99999, a letter between a and z or a letter between A
and Z. To print a sequence with leading zeros, type as many as you want here. (The system
beeps if you try typing both letters and numbers, such as 3B, or if you leave this option blank.)
To create our example, you would type 300.
4) Move the cursor to the Change by option. Enter the increment by which the sequenced
text should increase in each new label.
Type a number between 1 and 99999. To create our example, you would type 5, since the
number increases by five in each label.
5) Move the cursor to the Number of labels option. Type the number of labels you want
printed with this sequence (from 1 to 999).
For instance, to create our example, you would type 11. This would create labels with these
numbers: 300, 305, 310, 315, 320, 325, 330, 335, 340, 345, 350.
In our example, the Ending point option now shows the last sequenced label number: 350. This
value is automatically filled in if you enter a Number of labels value. You can also type this
value yourself, as with the Starting point value. (If you had typed this number yourself, the
Number of labels option would automatically display the number of labels to print: 11.)
Note: You can enter a Starting point number greater than the Ending
point number to decrement a sequence. For example, if you type a
Starting point of 8, a Change by value of 2, and an Ending point of 2, the
system will print these labels: 8, 6, 4 and 2. To decrement a sequence,
you must enter an Ending point value.
6) After selecting all options, press Enter.
The following marker appears in the text entry area:
To check or change any of the sequence values, position the cursor on the sequence marker and
press the Sequence key. Make any necessary changes and press the Enter key.
7) Type the text, if any, that comes after the sequenced text.
To create our example, you would type -96.
Label Design
3-29