Setting System Defaults - Brady BradyPrinter i3300 User Manual

Setting System Defaults

Default values are common settings that are pre-assigned to make the system usable as soon as
power is applied (for example, date and time are set to your local date and time). By changing the
defaults, you can set the settings to your specific requirements.
Defaults set here will stay in effect even when power is removed from the printer and during upgrades.
To configure or change any of these settings:
1. Make sure the printer is turned on.
2. Tap Settings
3. Select System Configuration.
4. Choose the setting to change.
•
•
•
•
BradyPrinter i3300
.
Language
- Select the desired language for messages displayed by the printer.
Measurement Units
- Inches or Millimeters
Date and Time
Power Save Mode (see page 5)
Setup
Setting System Defaults
18