Print Settings In Bluetooth Mode - Olivetti MY_WAY Plus User Manual

PRINT SETTINGS IN BLUETOOTH MODE

Printing on the Bluetooth wireless connection is possible if this capability is integrated in the computer
or if an external Bluetooth device has been installed (e.g. a Bluetooth USB pen). The Bluetooth function
must be active on the printer.
The range of the Bluetooth system is usually around 10 meters but may vary according to the
characteristics of the environment in which it is installed.
The printer supports the Bluetooth 1.2 Class 2 communication system for connection to compatible
computers and cellphones.
The method of installation varies according to the type of use of the printer.
Activating of Bluetooth
The printer is configured for use of Bluetooth from compatible cellphones and does not require any
type of installation.
To verify whether the Bluetooth capability is available, check that the blue LED of the Bluetooth icon is
ON. If the blue LED of the Bluetooth icon is OFF, proceed as follows:
• In the Windows environment:
1 Carry out USB installation as described in the documentation entitled "Setting up your printer"
note: If installation has already been performed, it is not necessary to repeat it.
2 Open the Toolbox program (Start > Olivetti> Programs> Toolbox).
note: The USB cable must be connected and the printer must be powered on.
3 Click the "Settings" button and then "Bluetooth Settings" to access configuration of Bluetooth
parameters.
4 Enable Bluetooth mode and click "Send settings": wait for automatic reception of the data of the
Bluetooth network present: the blue light on the printer lights up.
Close the "Toolbox" program.
5 The printer is not able to operate in the Bluetooth environment.
If a password is requested in the connection phase, type "0000" (or other if set by the user).
• In the Mac OS X environment:
1 Carry out USB installation as described in the documentation entitled "Setting up your printer".
note: If installation has already been performed, it is not necessary to repeat it.
2 Run the Toolbox program from the desktop.
note: The USB cable must be connected and the printer must be powered on.
3 Click the "Settings" button and then "Bluetooth Settings" to access configuration of Bluetooth
parameters.
4 Click "Bluetooth Status". Activate the Bluetooth mode and wait for automatic reception of the data
of the Bluetooth network present: select "Apply".
Close the "Toolbox" program.
5 The printer is now able to operate in the Bluetooth environment.
If a password is requested in the connection phase, type "0000" (or other if set by the user).
GETTING STARTED 13