Removing A Memory Card - Olivetti MY_WAY Plus User Manual

Proceed as follows:
1 Open the printer's left outer door by pressing the upper centre part of the door to release it, so you can
access the memory card slots.
2 Orient your specific memory card as indicated at the beginning of this section, carefully insert it into the
selected slot and then gently push it in until it stops.
The following figure shows an example of the insertion of a Compact Flash card.
note: The memory card does not go in all the way; do not try to force it in since doing so will damage
the card and the printer.
If the card is inserted correctly, an icon is displayed on the LCD indicating the total number of photos
stored on the memory card (only the compatible files are opened and counted).

Removing a Memory Card

1 Carefully pull the card completely out of its slot. To remove a Compact flash card, push the extraction
button located on the side of the insertion slot.
CAUTION: DO NOT remove the memory card while it is still being accessed either by the printer or
personal computer. Doing so could damage the photos stored on the card.
GETTING STARTED 11