Printing Photos From A Bluetooth Peripheral - Olivetti MY_WAY Plus User Manual

PRINTING PHOTOS FROM A BLUETOOTH PERIPHERAL

Your printer is equipped with an integrated Class 2 Bluetooth component.
Its default address is 0000 so it can directly print any .JPEG transmitted from a Bluetooth mobile phone
located within a maximum distance of 10 meters from the printer.
note: You can change your printer's default Bluetooth address from your personal computer, if
connected to the printer.
1 Make sure that paper is loaded in the printer. For information see "Loading Paper".
2 Open the printer's right outer door by pressing the upper centre part of the door to release it.
3 Turn on your printer. See "Turning On Your Printer". Bluetooth capabilities are automatically activated
on your printer.
4 Turn on the Bluetooth peripheral that you want to print from and, from within a distance of 10 meters
from the printer, launch a Bluetooth discovery procedure directly from your peripheral. By activating
this procedure, your Bluetooth peripheral will search for another Bluetooth device in the vicinity (in this
case, your printer) with which it can share data. For information on how to launch a Bluetooth
discovery procedure, read your peripheral's User's Guide.
5 When your Bluetooth peripheral has discovered your printer, launch the print job directly from your
Bluetooth device. For instructions, read your peripheral's User's Guide.
The Bluetooth activity indicator on the control panel will flash as the photos are being transferred from
the Bluetooth device to your printer for printing. The photos will be printed without borders.
20 CHAPTER 2