Integrated Peripherals - ECS 649-M2 Manual

Integrated Peripherals

These options display items that define the operation of peripheral components on
the system's input/output ports.
OnChip IDE Device
OnChip PCI Device
Onboard SuperIO Device
Onboard 1394 Device
Onboard LAN Device
Onboard LAN Boot ROM
IDE HDD Block Mode
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F5:Previous Values
OnChip IDE Device (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
InternalPCI/IDE
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Secondary Master PIO
IDE Secondary Slave PIO
Primary Master UltraDMA
Primary Slave UltraDMA
Secondary Slave UltraDMA
Secondary Slave UltraDMA
IDE DMA Transfer Access
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F5:Previous Values
Internal PCI/IDE (Both)
Use these items to enable or disable the internal PCI IDE channels that are integrated on the
mainboard.
IDE Primary/Secondary Master/Slave PIO (Auto)
Each IDE channel supports a master device and a slave device. These four items let you
assign which kind of PIO (Programmed Input/Output) is used by IDE devices. Choose Auto
to let the system auto detect which PIO mode is best, or select a PIO mode from 0-4.
IDE Primary/Secondary Master/Slave UltraDMA (Auto)
This mainboard supports UltraDMA technology, which provides faster access to IDE de-
vices. If you install a device that supports UltraDMA, change the item on this list to Auto.
You may have to install the UltraDMA driver supplied with this mainboard in order to use
an UltraDMA device.
Phoenix-AwardBIOS CMOS Setup Utility
Integrated Peripherals
[Press Enter]
[Press Enter]
[Press Enter]
[Enabled]
[Enabled]
[Disabled]
[Enabled]
F6:Fail-Safe Defaults
Phoenix-AwardBIOS CMOS Setup Utility
SiS OnChip IDE Device
[Both]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Enabled]
F6:Fail-Safe Defaults
Using BIOS
Item Help
Menu Level
F7:Optimized Defaults
Item Help
Menu Level
F7:Optimized Defaults
37