Pc Health Status - ECS 649-M2 Manual

44
Assign IRQ For USB (Enabled)
Names the interrupt request (IRQ) line assigned to the USB on your system. Activity of the
selected IRQ always awakens the system.
Maximum ASPM supported (L0s&L1)
This item controls the maximum level of ASPM supported on the given PCI Express links
on the system.
Maximum Payload Size (4096)
This item specifies the maximum TLP payload size for the PCI Express devices. The unit
is byte.
INT Pin 1-8 Assignment (Auto)
Identifies the interrupt request (IRQ) line assigned to a device connected to the PCI inter-
face of your system.

PC Health Status

On motherboards that support hardware monitoring, this item lets you monitor the
parameters for critical voltages, temperatures and fan speeds.
Shutdown Temperature (Disabled)
Enables you to set the maximum temperature the system can reach before powering down.
Warning Temperature (Disabled)
This item allows users to set the CPU warning temperature. The default setting is Disabled.
Users may change it to 60°C/140°F, 65°C/149°F, 70°C/158°F, 75°C/167°F, or 80°C/176°F
System Component Characteristics
These fields provide you with information about the systems current operating status. You
cannot make changes to these fields.
•
•
•
•
•
•
•
•
•
•
•
Phoenix-AwardBIOS CMOS Setup Utility
Shutdown Temperature
Warning Temperature
CPU Core Voltage
DDR Voltage
Vcc 3.3V
Vcc 5.0V
+12V
Voltage Battery
CPU Temperature
System Temperature
CPU FAN Speed
SYS FAN Speed
PWR FAN Speed
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F5:Previous Values
CPU Core Voltage
DDR Voltage
3.3V
5.0V
12V
Voltage Battery
CPU Temperature
System Temperature
CPU FAN Speed
SYS FAN Speed
PWR FAN Speed
PC Health Status
[Disabled]
[Disabled]
F6:Fail-Safe Defaults F7:Optimized Defaults
Using BIOS
Item Help
Menu Level