ECS 649-M2 Manual page 64

58
9
10
Creating a RAID 1 (Mirror) Array
•
•
•
To create a Mirror array, follow these steps:
1
2
3
Press <Q> again to exit this BIOS utility and the red message frame will show.
Press <Y> and <Enter> to save changes.
Once the array has been created, you will need to FDISK and format the array
as if it were a new single hard drive.
SIS965/SiS965L enables users to create a Mirror array with a pair of drives
only.
SIS965 enables users to create one or two Mirror arrays.
SiS965L enables users to create one Mirror array only.
Press <A> to start creating a RAID array.
Press <3> and <Enter> to select Mirror.
You will have two selections to create a RAID 1 array. The default value is
<1>. If you select <1>Auto Create, you can create a RAID 1 array faster and
easier. The result after creating will be show on step 7. Besides, you also
can select <2>Manual Create, see following steps.
SiS965/SiS965L SATA RAID Setup Guide