Integrated Peripherals - ECS P4IBAD2 Manual

Integrated Peripherals

These options display items that define the operation of peripheral compo-
nents on the system's input/output ports.
Phoenix – AwardBIOS CMOS Setup Utility
On-Chip Primary
IDE Primary Master
IDE Primary Slave
IDE Primary Master
IDE Primary Slave
On-Chip Secondary
IDE Secondary Master
IDE Secondary Slave
IDE Secondary Master
IDE Secondary Slave
USB Controller
USB Keyboard Support
USB Mouse Support
AC97 Audio
AC97 Modem
Init Display First
IDE HDD Block Mode
POWER ON Function
↑ ↓ → ← : Move
Enter : Select
F5:Previous Values
On-Chip Primary/Secondary PCI IDE (Enabled)
Use these items to enable or disable the PCI IDE channels that are integrated
on the mainboard.
IDE Primary/Secondary Master/Slave PIO (Auto)
Each IDE channel supports a master device and a slave device. These four
items let you assign which kind of PIO (Programmed Input/Output) is used by
IDE devices. Choose Auto to let the system auto detect which PIO mode is
best, or select a PIO mode from 0-4.
IDE Primary/Secondary Master/Slave UDMA (Auto)
Each IDE channel supports a master device and a slave device device. This
mainboard supports UltraDMA technology, which provides faster access to
IDE devices.
If you install a device that supports UltraDMA, change the appropriate item on
this list to Auto. You may have to install the UltraDMA driver supplied with this
mainboard in order to use an UltraDMA device.
USB Controller (Enabled)
Enable this item if you plan to use the Universal Serial Bus ports on this main-
board.
USB Keyboard Support (Disabled)
Enable this item if you plan to use a keyboard connected through the USB
port in a legacy operating system (such as DOS) that does not support Plug
Integrated Peripherals
PCI IDE [Enabled ]
PIO [Auto]
PIO [Auto]
UDMA [Auto]
UDMA [Auto]
PCI IDE [Enabled]
PIO [Auto]
PIO [Auto]
UDMA [Auto]
UDMA [Auto]
[Enabled]
[Disabled]
[Disabled]
[Auto]
[Auto]
[PCI Slot]
[Enabled]
[Hot KEY]
+/-/PU/PD:Value: F10: Save ESC: Exit
F6:Fail-Safe Defaults
34
Item Help
Menu Level
F1:General Help
F7:Optimized Defaults