10
Connecting Case Components
After you have installed the motherboard into a case, you can begin con-
necting the motherboard components. Refer to the following:
1
2
3
4
5
6
Connect the CPU cooling fan cable to CPU_FAN.
Connect the power cooling fan connector to PWR_FAN.(optional)
Connect the system cooling fan connector to SYS_FAN.
Connect the case switches and indicator LEDs to the PANEL1. If there is a 3-
pin LED cable, connect it to SJ1.(optional)
Connect the standard power supply connector to ATX_POWER.
Connect the auxiliary case power supply connector to ATX12V.
Installing the Motherboard