ECS 649-M2 Manual page 48

42
Resume By MACPME (Enabled)
Use this item to enable MAC activity to wake up the system from a power saving mode.
Resume By PCI PME (Enabled)
This item allows users to enable or disable PCI activity to wakeup the system from a power
saving mode.
Resume By USB (S3) (Disabled)
This item allows users to enable or disable USB activity to wakeup the system from a power
saving mode.
PS2 KB/MS Wakeup from S3 (Disabled)
This option enables or disables you to allow mouse or keyboard activity to awaken the
system from power saving mode.
** Reload Global Timer Events **
Global Timer (power management) events are I/O events whose occurrence can prevent the
system from entering a power saving mode or can awaken the system from such a mode. In
effect, the system remains alert for anything that occurs to a device that is configured as
Enabled, even when the system is in a power-down mode.
Primary/Secondary IDE 1/0 (Disabled)
When these items are enabled, the system will restart the power-saving timeout counters
when any activity is detected on any of the drives or devices on the primary or secondary
IDE channels.
FDD, COM, LPT Port (Disabled)
When this item is enabled, the system will restart the power-saving timeout counters when
any activity is detected on the floppy disk drive, serial ports, or the parallel port.
PCI PIRQ[A-D]# (Disabled)
When disabled, any PCI device set as the Master will not power on the system.
Press <Esc> to return to Power Management Setup page.
Using BIOS