Integrated Peripherals Option - ECS P4IBAS2 Manual

Integrated Peripherals Option

These items define the operation of peripheral components on
the system's input/output ports.
CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software
On-Chip Primary PCI IDE
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Primary Master UDMA
IDE Primary Slave UDMA
On-Chip Secondary PCI IDE
IDE Secondary MasterPIO
IDE Secondary Slave PIO
IDE Secondary MasterUDMA
IDE Secondary Slave UDMA
USB Controller
USB Keyboard Support
USB Mouse Support
AC97 Audio
AC97 Modem
Init Display First
IDE HDD Block Mode
POWER ON Function
↑ ↓ → ← : Move Enter : Select
F5:Previous Values
On-Chip Primary/Secondary PCI IDE (Enabled)
Use these items to enable or disable the PCI IDE channels
that are integrated on the mainboard.
IDE Primary/Secondary Master/Slave PIO (Auto)
Each IDE channel supports a master device and a slave de-
vice. These four items let you assign which kind of PIO
(Programmed Input/Output) is used by IDE devices. Choose
Auto to let the system auto detect which PIO mode is best, or
select a PIO mode from 0-4.
IDE Primary/Secondary Master/Slave UDMA (Auto)
Each IDE channel supports a master device and a slave de-
vice. This mainboard supports UltraDMA technology, which
provides faster access to IDE devices.
If you install a device that supports UltraDMA, change the ap-
propriate item on this list to Auto. You may have to install the
UltraDMA driver supplied with this mainboard in order to use
an UltraDMA device.
Integrated Peripherals
[Enabled ]
[Auto]
[Auto]
[Auto]
[Auto]
[Enabled]
[Auto]
[Auto]
[Auto]
[Auto]
[Enabled]
[Disabled]
[Disabled]
[Auto]
[Auto]
[PCI Slot]
[Enabled]
[Hot KEY]
+/-/PU/PD:Value: F10: Save ESC: Exit
F6:Fail-Safe Defaults
50
Item Help
Menu Level
F1:General Help
F7:Optimized Defaults