Bios Utility Operation - ECS 649-M2 Manual

Confirming Windows 98/Me Driver Installation
1 From Windows 98/Me, open the Control Panel from "My Computer" followed
by the System icon.
2 Choose the "Device Manager" tab.
3 Click the "+" in front of "IDE ATA/ATAPI Controllers" hardware type. The driver
"SiS965 IDE/Raid Controller" should appear.

BIOS Utility Operation

BIOS Utility supports windows 2000/XP/98/Me.
Starting BIOS Utility
1 Boot your system. If this is the first time you have booted with the SiS965 or
SiS965L and the drives installed, the BIOS will display the following:
Silicon Integrated Systems Corp. RAID BIOS Setting Utility v0.XX
(c) 2003-2005 Silicon Integrated Systems Corp. All Rights Reserved.
Press <Ctrl.<S> to run BIOS Setting Utility
2 Press <Ctrl-S> keys to display the SiS965/SiS965L Utility Main Menu.
3 You can press <B> key to select the boot disk on the SiS965 controller. The
yellow highlight will show on the disk and you can switch it to select the disk
you wanted. Press "Enter" key to select it and the selected boot device will be
marked by "*". The default boot device will be set as Disk 1.
4 Press <R> to display the RAID setup menu below. This is the fastest and
easiest method to creating your first array.
SiS965/SiS965L SATA RAID Setup Guide
55