Integrated Peripherals Option - ECS P6VXM2 Manual

Integrated Peripherals Option

This option displays a list of items that defines the operation of
some peripheral components on the system's input/output ports.
CMOS Setup Utility – Copyright (C) 1984 – 2000 Award Software
OnChip IDE Channel0
OnChip IDE Channel1
IDE Prefetch Mode
Primary Master PIO
Primary Slave PIO
Secondary Master PIO
Secondary Slave PIO
Primary Master UDMA
Primary Slave UDMA
Secondary Master UDMA
Secondary Slave UDMA
Init Display First
IDE HDD Block Mode
Onboard FDD Controller
Onboard Serial Port 1
Onboard Serial Port 2
UART 2 Mode
x IR Function Duplex
x TX,RX inverting enable
↑ ↓ → ← : Move Enter : Select
F5:Previous Values
On-Chip IDE Channel 0/1
Use these items to enable or disable the PCI IDE channels that are in-
tegrated on the mainboard.
IDE Primary/Secondary Master/Slave PIO
Each IDE channel supports a master device and a slave device. These
four items let you assign which kind of PIO (Programmed Input/Output)
is used by IDE devices. You can choose Auto, to let the system auto
detect which PIO mode is best, or you can install a PIO mode from 0-4.
IDE Primary/Secondary Master/Slave UDMA Default: Auto
Each IDE channel supports a master device and a slave device. This
mainboard supports UltraDMA. UltraDMA technology provides faster
access to IDE devices.
Integrated Peripherals
Enabled
Enabled
Enabled
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
PCI Slot
Enabled
Enabled
Auto
Auto
Standard
Half
No, Yes
+/-/PU/PD:Value: F10: Save ESC: Exit
F6:Fail-Safe Defaults
51
Item Help
Menu Level
F1:General Help
F7:Optimized Defaults
Default: Enabled
Default: Auto