The show fdb command displays the hosts learned by the switch and the ports to which they are
connected. To display forwarding database (FDB) information, type the following command:
DWS-1008# show fdb
* = Static Entry. + = Permanent Entry. # = System Entry.
VLAN TAG
Dest MAC/Route Des
---- ---- ------------------ ----- ----------------------------------------------------------------------------------------
130
3
00:05:5d:7e:94:83
130
130
00:02:2d:85:6b:4d
130
130
00:0b:0e:12:34:56
130
130
00:0b:0e:02:76:f6
130
2
00:02:2d:86:bd:38
130
3
00:05:5d:84:d3:d3
4097
00:0b:0e:00:04:30
4096
00:0b:0e:00:04:30
130
00:0b:0e:00:04:30
Total Matching FDB Entries Displayed = 32
dynamic = 27, static=0, permanent=0, system=5
The show arp command displays the ARP aging timer and ARP entries in the system. To display ARP
information, type the following command:
DWS-1008# show arp
ARP aging time: 1200 seconds
Host
HW Address
-------------------------------------------------------------------------------------------------
10.8.1.1
00:30:b6:3e:5c:a8 1
10.8.107.1
00:0b:0e:00:04:0c 1
Port mirroring is a troubleshooting feature that copies (mirrors) traffic sent or received by a switch port
(the source port) to another switch port (the observer). You can attach a protocol analyzer to the observer
port to examine the source port's traffic. Both traffic directions (send and receive) are mirrored.
Note: Port mirroring enables you to snoop traffic on wired ports. To snoop wireless traffic, see "Remotely
Monitoring Traffic".
D-Link DWS-1008 User Manual
Viewing FDB Information
[CoS]
#
#
#
Viewing ARP Information
VLAN
Port Mirroring
Destination Ports or VCs/[Protocol Type]
1
t:192.168.14.6
t:192.168.15.5
t:192.168.14.6
3
1
CPU
CPU
CPU
Type
State
DYNAMIC
RESOLVED
LOCAL
RESOLVED
[ALL]
[ALL]
[ALL]
[ALL]
[ALL]
[ALL]
[ALL]
[ALL]
[ALL]
0