Displaying The Snoop Filters Mapped To A Radio; Displaying The Snoop Filter Mappings For All Radios; Removing Snoop Filter Mappings - D-Link DWS-1008 - AirPremier MobileLAN Switch Product Manual

Displaying the Snoop Filters Mapped to a Radio

To display the snoop filters that are mapped to a radio, use the following command:
show snoop map filter-name
The following command shows the mapping for snoop filter snoop1:
DW-1008# show snoop map snoop1
filter 'snoop1' mapping
Dap: 3 Radio: 2

Displaying the Snoop Filter Mappings for All Radios

To display all snoop filter mappings, use the following command:
DWS-1008# show snoop
Dap: 3 Radio: 2
snoop1
snoop2
Dap: 2 Radio: 2
snoop2
To remove a snoop filter from a specific radio, use the following command:
clear snoop map filter-name dap dap-num radio {1 | 2}
The following command removes snoop filter snoop2 from radio 2 on Distributed AP 3:
DWS-1008# clear snoop map snoop2 dap 3 radio 2
success: change accepted.
To remove all snoop filter mappings from all radios, use the following command:
clear snoop map all
D-Link DWS-1008 User Manual

Removing Snoop Filter Mappings