Deleting A Server Group; Radius And Server Group Configuration Scenario - D-Link DWS-1008 - AirPremier MobileLAN Switch Product Manual

To remove a server group, type the following command:
clear server group group-name
For example, to delete the server group shorebirds, type the following command:
DWS-1008# clear server group shorebirds
success: change accepted.
The members of the group remain configured, although no server groups are shown:
DWS-1008# show aaa
Default Values
authport=1812 acctport=1813 timeout=5 acct-timeout=5
retrans=3 deadtime=0 key=(null) author-pass=(null)
Radius Servers
Server Addr
--------------------------------------------------------------------------------------------------
sandpiper 192.168.253.3
heron 192.168.253.1
coot 192.168.253.4
egret 192.168.253.2
Server groups
RADIUS and Server Group Configuration
The following example illustrates how to declare four RADIUS servers to a switch and configure them
into two load-balancing server groups, swampbirds and shorebirds:
1. Configure RADIUS servers. Type the following commands:
DWS-1008# set radius server pelican address 192.168.253.11 key elm
DWS-1008# set radius server seagull address 192.168.243.12 key fir
DWS-1008# set radius server egret address 192.168.243.15 key pine
DWS-1008# set radius server sandpiper address 192.168.253.17 key oak
2. Place two of the RADIUS servers into a server group called swampbirds. Type the following
command:
DWS-1008# set server group swampbirds members pelican seagull
D-Link DWS-1008 User Manual

Deleting a Server Group

Ports
1812 1813
1812 1813
1812 1813
1812 1813
Scenario
T/o Tries Dead State
5 3 0 UP
5 3 0 UP
5 3 0 UP
5 3 0 UP