D-Link DWS-1008 - AirPremier MobileLAN Switch Product Manual page 194

ciphers: cipher-tkip, cipher-wep40 authentication: pre-shared key TKIP
countermeasures time: 60000ms
pre-shared-key: 92f99cd49e186cadee13fda7b2a2bac78975a5723a4a6b3
1b5b5395d6b001dbe
12. Map service profile wpa-wep-for-mac to radio profile rp3. Type the following commands:
DWS-1008# set radio-profile rp3 service-profile wpa-wep-for-mac
success: change accepted.
13. Apply radio profile rp3 to radio 1 on port 4 and to radios 1 and 2 on port 6 and enable the
radios, and verify the configuration changes. Type the following commands:
DWS-1008# set ap 4,6 radio 1 radio-profile rp3 mode enable
success: change accepted.
DWS-1008# set ap 6 radio 2 radio-profile rp3 mode enable
success: change accepted.
DWS-1008# show ap config
Port 4: AP model:
boot-download-enable:
force-image-download:
Radio 1:
tx pwr: 1,
auto-tune max-power: default
Port 6: AP model: DWL-8220AP,
boot-download-enable:
force-image-download:
Radio 1:
tx pwr: 1, profile: rp3
Radio 2: type: 802.11a,
tx pwr: 1, profile: rp3 auto-tune max-power: default
14. Save the configuration. Type the following command:
DWS-1008# save config
success: configuration saved.
D-Link DWS-1008 User Manual
DWL-8220AP, POE: enable, bias: high, name: MP04
YES
YES
type: 802.11a, mode: enabled,
profile: rp3
POE: enable,
YES
YES
type: 802.11g, mode:
auto-tune max-power: default
mode: enabled, channel: 36
channel: 36
bias: high, name: MP06
enabled, channel: 6
1