D-Link DWS-1008 - AirPremier MobileLAN Switch Product Manual page 78

System idle timeout: 3600
System MAC:
=====================================================
Boot Time: 2000-03-18 22:59:19
Uptime: 0 days 00:13:45
=====================================================
Fan status: fan1 OK fan2 OK fan3 OK
Temperature: temp1 ok temp2 ok temp3 ok
PSU Status: Lower Power Supply DC ok AC ok Upper Power Supply missing
Memory: 156.08/496.04 (31%)
Total Power Over Ethernet : 0.000
=====================================================
3. Configure ports 2 through 8 for connection to access point model DWL-8220AP and verify
the configuration changes. Type the following commands:
DWS-1008# set port type ap 2-8 model dwl-8220ap poe enable
This may affect the power applied on the configured ports. Would you like to continue?
(y/n) [n]y
success: change accepted.
DWS-1008# show port status
Port Name Admin
====================================================================
1 mgmt up
2 finance up
3 accounting up
4 shipping up
5 lobby up
6 conf_room1 up
7 backbone up
8 backbone up
DWS-1008# show port poe
Port Name
============================================================
1 mgmt
2 finance
3 accounting
4 shipping
5 lobby
6 conf_room1
7 Backbone
8 Backbone
D-Link DWS-1008 User Manual
00:0B:0E:00:04:0C
Oper Config
up auto
up auto
up auto
up auto
up auto
up auto
down auto
down auto
Link Status Port Type
up ---
up AP
up AP
up AP
up AP
up AP
down ---
down ---
Actual Type
100/full network
100/full ap
100/full ap
100/full ap
100/full ap
100/full ap
network
network
PoE Config PoE Draw(Watts)
disabled off
enabled 7.04
enabled 7.04
enabled 7.04
enabled 7.04
enabled 7.04
--- invalid
--- invalid
Media
10/100BaseTx
10/100BaseTx
10/100BaseTx
10/100BaseTx
10/100BaseTx
10/100BaseTx