Displaying Trace Results; Copying Trace Results To A Server - D-Link DWS-1008 - AirPremier MobileLAN Switch Product Manual

To view the output of currently running trace commands, use the following command:
show log trace [{+|-|/}number-of-messages] [facility facility-name]
[matching string] [severity severity-level]
For example, the following command displays a trace log of error-level events:
DWS-1008# show log trace severity error
KERNEL Jan 15 23:08:10 ERROR duplicate IP address 10.7.122.102 sent from
link address 00:05:5d:45:ae:cd
To display a specific number of trace log messages, you must enter a plus sign (+), minus sign (-), or
slash (/) before the number. These characters filter the messages displayed as follows:
+number-of-messages
-number-of-messages
/number-of-messages
To filter trace output by MSS area, use the facility facility-name keyword. For a list of valid facilities for
which you can view event messages, type the following command:
DWS-1008# show log trace facility ?
<facility name> Select one of: KERNEL, AAA, SYSLOGD, ACL, APM, ARP,ASO, BOOT,
CLI, CLUSTER, CRYPTO, DOT1X, ENCAP, ETHERNET, GATEWAY, HTTPD, IGMP, IP,
MISC, NOSE, NP, RAND, RESOLV, RIB, ROAM, ROGUE, SM, SNMPD, SPAN, STORE,
SYS, TAGMGR, TBRIDGE, TCPSSL, TELNET, TFTP, TLS, TUNNEL, VLAN, X509, XML, AP,
RAPDA, WEBVIEW, EAP, PORTCONFIG, FP.

Copying Trace Results to a Server

To copy the contents of the trace buffer to a file on a TFTP server, use the following command:
copy trace-buffer-name tftp://[destination-ip-addr | destination-hostname]
/destination-filename
To find the name of the trace buffer file, use the dir command.
For example, the following command copies the log messages in trace buffer 0000000001 to a TFTP
server at IP address 192.168.253.11, in a file called log-file:
DWS-1008# copy 0000000001 tftp://192.168.253.11/log-file
D-Link DWS-1008 User Manual

Displaying Trace Results

Displays the specified number of log entries, starting
with the oldest in the log.
Displays the specified number of entries, starting with
the newest in the log.
Displays the specified number of the most recent
entries in the log, starting with the least recent.