Assigning A Security Acl On A Radius Server; Clearing A Security Acl From A User Or Group; Assigning Encryption Types To Wireless Users - D-Link DWS-1008 - AirPremier MobileLAN Switch Product Manual

8 port 10/100 wireless switch with power over ethernet
Hide thumbs Also See for DWS-1008 - AirPremier MobileLAN Switch:
Table of Contents

Advertisement

Assigning a Security ACL on a RADIUS Server

To assign a security ACL name as the Filter-Id authorization attribute of a user or group record on a
RADIUS server, see the documentation for your RADIUS server.

Clearing a Security ACL from a User or Group

To clear a security ACL from the profile of a user, MAC user, or group of users or MAC users in the local
database, use the following commands:
clear user username attr filter-id
clear usergroup groupname attr filter-id
clear mac-user username attr filter-id
clear mac-usergroup groupname attr filter-id
If you have assigned both an incoming and an outgoing filter to a user or group, enter the appropriate
command twice to delete both security ACLs. Verify the deletions by entering the show aaa command
and checking the output.
To delete a security ACL from a user's configuration on a RADIUS server, see the documentation for
your RADIUS server.

Assigning Encryption Types to Wireless Users

When a user turns on a wireless laptop or PDA, the device attempts to find an access point and form
an association with it. Because DWL-8220AP access points support the encryption of wireless traffic,
clients can choose an encryption type to use.
You can configure access points to use the encryption algorithms supported by the Wi-Fi Protected
Access (WPA) security enhancement to the IEEE 802.11 wireless standard.
If you have configured access points to use specific encryption algorithms, you can enforce the type
of encryption a user or group must have to access the network. When you assign the Encryption-Type
attribute to a user or group, the encryption type or types are entered as an authorization attribute into
the user or group record in the local database or on the RADIUS server. Encryption-Type is a D-Link
vendor-specific attribute (VSA).
Clients who attempt to use an unauthorized encryption method are rejected.
D-Link DWS-1008 User Manual
0

Advertisement

Table of Contents
loading

Table of Contents