Managing System Files; About System Files; Displaying Software Version Information - D-Link DWS-1008 - AirPremier MobileLAN Switch Product Manual

Managing System Files

A DWS-1008 switch contains nonvolatile storage. MSS allows you to manage the files in nonvolatile
storage. In addition, you can copy files between the switch and a TFTP server on the network.
Generally, a switch's nonvolatile storage contains the following types of files:
• System image files—The operating system software for the switch and its attached AP
access points
• Configuration files—CLI commands that configure the switch and its attached AP access
points
• System log files—Files containing log entries generated by MSS.
When you power on or reset the switch or reboot the software, the switch loads a designated system
image, then loads configuration information from a designated configuration file.
A DWS-1008 switch can also contain temporary files with trace information used for troubleshooting.
Temporary files are not stored in nonvolatile memory, but are listed when you display a directory of the
files on the switch.

Displaying Software Version Information

To display the software, firmware, and hardware versions, use the following command:
show version [details]
The details option displays hardware and software information about the access points configured on
the switch.
To display version information for a DWS-1008 switch, type the following command:
DWS-1008# show version
Mobility System Software, Version: 4.1.0 QA 67
Copyright (c) 2002, 2003, 2004, 2005 D-Link, Inc. All rights reserved.
Build Information: (build#67) TOP 2005-07-21 04:41:00
Model: DWS-1008
Hardware
Mainboard: version 24 ; revision 3 ; FPGA version 24
PoE board: version 1 ; FPGA version 6
Serial number 0321300013
Flash: 4.1.0.14 - md0a
Kernel: 3.0.0#20: Fri May 20 17:43:51 PDT 2005
BootLoader: 4.10 / 4.1.0
D-Link DWS-1008 User Manual

About System Files