Enabling Soda Functionality For The Service Profile; Disabling Enforcement Of Soda Agent Checks - D-Link DWS-1008 - AirPremier MobileLAN Switch Product Manual

8 port 10/100 wireless switch with power over ethernet
Hide thumbs Also See for DWS-1008 - AirPremier MobileLAN Switch:
Table of Contents

Advertisement

Enabling SODA Functionality for the Service Profile

To enable SODA functionality for a service profile, use the following command:
set service-profile name soda mode {enable | disable}
When SODA functionality is enabled for a service profile, a SODA agent is downloaded to clients
attempting to connect to an AP managed by the service profile. The SODA agent performs a series of
security-related checks on the client. By default, enforcement of SODA agent checks is enabled, so that
a connecting client must pass the SODA agent checks in order to gain access to the network.
For example, the following command enables SODA functionality for service profile sp1:
DWS-1008# set service-profile sp1 soda mode enable
success: change accepted.

Disabling Enforcement of SODA Agent Checks

When SODA functionality is enabled for a service profile, by default the SODA agent checks are
downloaded to a client and run before the client is allowed on the network. You can optionally disable
the enforcement of the SODA security checks, so that the client is allowed access to the network
immediately after the SODA agent is downloaded, rather than waiting for the security checks to be
run.
To disable (or re-enable) the enforcement of the SODA security checks, use the following command:
set service-profile name enforce-checks {enable | disable}
For example, the following command disables the enforcement of the SODA security checks, allowing
network access to clients after they have downloaded the SODA agent, but without requiring that the
SODA agent checks be completed:
DWS-1008# set service-profile sp1 enforce-checks disable
success: change accepted.
Note that if you disable the enforcement of the SODA security checks, you cannot apply the success
and failure URLs to client devices. In addition, you should not configure the SODA agent to refer to the
success and failure pages on the switch if you have disabled enforcement of SODA agent checks.
D-Link DWS-1008 User Manual


Advertisement

Table of Contents
loading

Table of Contents