Making Settings; Paper Type User Setting - Mita DP-1400 Instruction Handbook Manual

2.8. Setting the Paper Type

Making Settings

The following describes the procedure for setting the paper type using the Recycled type and Cassette as
examples.
1.
Display Paper handling > on the printer's Mode Select Menu and press the
+ and – keys to display the Cassette type.
Paper handling >
2.
Pressing the ENTER key will cause a ? to flash. Press the + and – keys to display Recycled.
>Cassette type
? Recycled
Press the CANCEL key if you want to cancel the setting. The ? display will disappear.
3.
Pressing the ENTER key will cause the ? to disappear. Pressing the EXIT key will exit the setting.
The same procedure can be used to set the paper type for other paper sources.

Paper Type User Setting

The following describes the procedure used to set a user-defined paper type for the printer. Eight custom user
settings may be registered. After having been set, any of these may be called up when setting the paper type
for a paper source.
1.
Display Paper handling > on the printer's Mode Select Menu and press the
+ and – keys to display >Type adjust.
Paper handling >
2.
Pressing the ENTER key will cause a ? to be displayed. Press the + and – keys to select the paper type
(see page 2-19) that you want to customize and then press the ENTER key.
>Type adjust
? Custom #
Note that if you change the setting for a paper type other than Custom 1 through 8 the paper
type setting for each paper source set to that paper type will be changed.
2-20
>Cassette type
Plain
>Type adjust >
Custom #
key. Then use the
key. Then use the