Table of Contents
Advertisement
2.10. Dumping Received Data
It is possible to print data received by the printer as hexadecimal code for the purposes of debugging pro-
grams and files.
1.
Pressing the ENTER key once while >Print HEX-DUMP is shown on the message display will cause
a ? to display.
2.
Pressing the ENTER key once again, Processing will be shown for a second then the message
Waiting will appear on the message display.
3.
Send data to be dumped to the printer. The message Processing will be displayed during receiving
the data. Once the dumped data you require has been output, it is possible to cancel the printing of any
further dumped data by taking the printer offline by pressing the ON LINE key and then pressing the
CANCEL key.
4.
Once all data has been received, the message Waiting will appear. Press the FORM FEED key to finish
printing.
2.10. Dumping Received Data
2-23
Advertisement
Table of Contents
