6-Open The Paper Stopper On The Face-Down Output Tray; 7-Install The Face-Up Output Tray (If Required) - Mita DP-1400 Instruction Handbook Manual

6—Open the paper stopper on the face-down output tray
Open the paper stopper as shown right.
7—Install the face-up output tray (if required)
This face-up output tray is a separate option (FT-200) with the DP-1400.
If you want the printed pages stacked face-up (in reverse order), mount the face-up output tray as follows.
Depending on the size of the paper you use, mount the paper stopper on the face-up output tray as shown
below.
Paper Stopper
Legal Size
A4 Size
Letter Size
1.4. Setting Up and Interfacing
Paper Stopper
Face-up Output
Tray
1-13