Mita DP-1400 Instruction Handbook Manual page 99

Message
Load Cassette #
(paper size)/(paper type)
*(paper size) and (paper
type) are displayed flashing
alternately.
Load MP tray
(paper size)/(paper type)
*(paper size) and (paper
type) are displayed flashing
alternately.
Call service
personEn:0123456
Call service
personFn:0123456
There is data for printing that matches with a paper cassette setting (paper size, paper
type), but there is no paper in the cassette.
Set paper into the paper source as displayed on the control panel, and press the
CONTINUE key to restart printing. However, the paper source number (#) is only dis-
played when there is an optional paper feeder installed.
Or, if you want to print from a different paper source press the FEED key to display Use
alternative? and you can change the source for paper feeding. Further, you can
change the paper source by pressing the FEED key.
After selecting a paper source and pressing the MODE key, Paper handling >
appears. By pressing the
the correct paper type, press the EXIT key and printing starts.
There is no paper cassette set (paper size, paper type) that matches with the data for
printing .
Because there is no cassette that matches the data, printing is done from the MP tray.
Set paper into the MP tray that matches the paper size and type shown on the display
and press the CONTINUE button to restart printing.
Or, if you want to print from a different paper source press the FEED key to display Use
alternative? and you can change the source for paper feeding. Further, you can
change the paper source by pressing the FEED key.
After selecting a paper source and pressing the MODE key, Paper handling >
appears. By pressing the
the correct paper type, press the EXIT key and printing starts.
Mechanical error (n=0, 1, 2, ...)-Call a service person. The printer does not operate
when a message beginning with E is displayed. The total number of pages printed is
also indicated.
Controller error (n=0, 1, 2, ...)-Call a service person. The printer does not operate
when a message beginning with F is displayed. The total number of pages printed is
also indicated.
5.5 Indicators and Messages
Corrective Action
key, the paper type settings menu appears. After setting
key, the paper type settings menu appears. After setting
5-9