Setting The Audio Warning (Buzzer) - Mita DP-1400 Instruction Handbook Manual

2.15. Setting the Audio Warning (Buzzer)

In addition to the message displayed when the paper supply is exhausted, or when paper jamming occurs,
an audio warning is made to sound. This is useful, for example, when the printer is in a location some dis-
tance from the user.
The audio alarm is set to ON when leaving the factory. An audio alarm corresponding to the type of printer
error will sound according to the table below. If the alarm is set to OFF, it is made not to sound.
Type of Error and Corresponding Audio Alarm (Buzzer)
Priority Error Message
Replace Toner
High
Clean printr
Replace
toner bottle
Clean printer
Press CONTINUE
Paper jam
Face-down tray
paper full
Paper path error
Option stacker
paper full
Remove
Stacker paper
Load MP tray
Memory overflow
Press CONTINUE
Print overrun
Press CONTINUE
KPDL error
Press CONTINUE
MEMORYCARD err
Press CONTINUE
RAM DISK error
Press CONTINUE
Opt. ROM error
Press CONTINUE
Set paper
Press CONTINUE
Load Cassette
Add paper
Low
* Model DP-1800 only
** These error messages are displayed if the relevant option is fitted.
Short beeps: approx. 0.8 s
Long beeps: approx. 0.4 s
waste-
Opt.
2.15. Setting the Audio Warning (Buzzer)
Alarm Frequency
short beeps
short beeps
short beeps
short beeps
short beeps
short beeps
short beeps
short beeps
short beeps
short beeps
short beeps
short beeps
short beeps
short beeps
short beeps
short beeps
short beeps
long beeps
Remarks
—
—
—
—
*
**
**
**
—
—
—
—
**
—
**
—
—
—
2-27