Table of Contents
Advertisement
1.4. Setting Up and Interfacing
1—Open the top cover
1.
Remove the packing tape from the printer.
2.
Open the printer top cover all the way.
2—Install the toner container
1.
Take the toner container from the toner kit.
2.
With the label side down, thoroughly shake the
toner container (in the direction of the arrow) ten
times or more to loosen and mix the toner inside.
3.
The bottom of the toner container is sealed with a
sealing strip. Peel off the seal on the toner container
and carefully pull off and dispose of the sealing
strip.
Be sure to peel the seal off the toner container
before the toner container is fitted into the devel-
oper unit.
4.
Install the toner container on the developer
as show in the diagram.
1-8
Developer Unit
Top Cover
Toner Container
Sealing strip
Advertisement
Table of Contents
