Table of Contents
Advertisement
2.7. Setting Custom Sizes
2.7.
Setting Custom Sizes
When setting sizes other than A5, A4, B5, Letter or Legal into the paper cassette, set the size of the paper to
be used into the printer by the following procedure.
1.
Display Paper handling> on the printer's display panel and press the
– keys to display >Cassette size >.
2.
By pressing the
You can select mm or inch by using the + and – keys.
>>Unit
mm
>>Unit
inch
3.
With the unit settings completed, >>X dimension appears as shown in the diagram below (the
paper width setting). Press the ENTER key while in this state and the cursor begins to flash.
The width that can be set must be in the range of 148-216mm (5.83-8.5 inches).
>>X dimension
216 mm
4.
By pressing the + and – keys the numbers above the cursor change. By pressing the
position of the cursor moves.
5.
When you have input the desired custom size, press the ENTER key to complete the width setting.
6.
With the width settings completed, press the + and – keys and >>Y dimension appears as shown
below (the paper length setting). Set this in the same way as the width setting.
The length that can be set must be in the range of 210-356mm (8.27-14.02 inches).
>>Y dimension
356 mm
2-18
key >>Unit appears as shown in the diagram below (The unit of the paper length).
_
_
key. Then use the + and
or
keys the
Advertisement
Table of Contents
