Table of Contents
Advertisement
1.2. Unpacking and Inspection
1.2.
Unpacking and Inspection
The printer is packed as shown below. Unpack the printer following diagrams 1 and 2 on the next page. While
unpacking it, check that the listed parts are all accounted for.
Examine the package for any signs of damage that may have been caused during transportation. If the car-
ton is found to be badly damaged, leave the carton unopened and immediately notify the dealer from whom
you purchased the printer.
Save the box and other packing materials in case you have to repack the printer for transportation at a later date.
List of Shipped Components
(A) Face-up output tray (DP-1800 only)
(B) Toner container and Waste Toner Bottle (Box for the developer unit)
(C) Power cord
(D) User's Manual and CD-ROM, including the printer drivers
(E) Paper stopper for Face-up out tray (DP-1800 only)
1
(A)
(B)
(C)
To remove the printer from the box, grasp the handholds on either side of the printer. Lift the printer from
the carton as shown below.
! Always use these handholds when-
ever you lift or move the printer.
! The handhold on the right side of the
printer doubles as the memory card
slot. Be sure to remove the memory
card first, if inserted, before lifting or
moving the printer.
1-4
2
(D)
(E)
Printer
Advertisement
Table of Contents
