Attaching The Cables - Lexmark C920 Service Manual

3.
Rotate the locking knobs counterclockwise until they contact the finisher base.

Attaching the cables

The finisher comes with an interface cable and Y-power cord. The interface cable connects the finisher to the
printer, and the Y-power cord provides electrical power to the finisher and printer.
1.
Turn the printer off, and unplug the power cord from the power outlet.
2.
Push the latch in and hold it.
3.
Roll the finisher away from the printer.
4.
Release the latch.
5056-XXX
3-65
Diagnostic aids