Lexmark C920 Service Manual page 79

Message
Serial <x>
Some held jobs were lost
Staples Empty
Staples Low
Standard Bin Full
Submitting selection
Transfer Belt Life Warning
Tray <x> Empty
Tray <x> Low
Tray <x> Missing
USB
USB <x>
USB drive removed
View supplies
Waiting
1565 Emul Error
Load Emul Option
30 Coating roll missing
30 <color> print unit missing
34 Incorrect media
Meaning
See action column.
The printer frees memory by
deleting the oldest held job and
continues deleting held jobs until
there is enough printer memory to
process the job.
Staple cartridge status message
Output bin full.
The printer is processing a
selection request.
The transfer belt is nearing the
end of life.
The specified paper tray is empty.
The specified paper tray is low.
The specified paper tray is
missing or improperly installed.
See action column.
The printer has received a page of
data to print, but is waiting for an
End of Job command, a Form
Feed command, or additional
data.
The printer automatically clears
the message in 30 seconds, and
then disables the download
emulator on the firmware card.
The coating roll in the fuser is
improperly installed or missing.
The specified color print unit is
improperly installed or missing.
Action
A serial interface is the active
communication link.
-Select Continue to clear the
message and continue printing.
-Cancel the current job.
-Install a new staple cartridge.
-Select Continue to clear the
message and continue printing
without stapling.
-Cancel the current job.
Remove the stack of paper from the
bin to clear the message.
Wait for the message to clear.
-Select Continue to clear the
message and print without installing
a new transfer belt.
-Replace the transfer belt and, if
necessary, reset the printer internal
counter for the transfer belt.
Load paper in the tray to clear the
message.
Add paper to the tray to clear the
message.
Insert the tray into the printer.
The printer is processing data
through the specified USB port.
-Wait for the message to clear.
-Insert the USB drive.
Displays the current level of all
printer supplies.
-Press Select to print the contents of
the buffer.
-Cancel the current job.
Download the correct download
emulator version from the Lexmark
Web site.
Install the coating roll, and close the
top cover.
Install the specified print unit, and
close the top cover.
-Load the appropriate media in the
selected source.
-Select Continue to clear the
message and print the job using a
different paper source.
Diagnostic information
5056-XXX
2-37