Attaching Cables - Lexmark 4021 User Manual

Additional printer setup
13
Turn on the printer.
14
Set the printer software to recognize the optional tray. For more information, see
in the print driver" on page

Attaching cables

CAUTION—POTENTIAL INJURY: Do not set up this product or make any electrical or cabling
connections, such as a power cord, a fax feature or USB cable, during a lightning storm.
Connect the printer to the computer using a USB cable, or to the network using an Ethernet cable.
Make sure to match the following:
•
The USB symbol on the cable with the USB symbol on the printer
•
The appropriate Ethernet cable to the Ethernet port
Use the
1 Printer power cord socket
2 Internal Solutions Port (ISP) or printer hard disk slot
Note: If the printer has support for wireless connection,
then the wireless antenna is attached here.
3 Ethernet port
4 USB ports
5 USB printer port
Warning—Potential Damage: Do not touch the USB cable, any wireless network adapter, or the printer in the
area shown while actively printing. Loss of data or a malfunction can occur.
40.
To
Connect the printer to a properly grounded
electrical outlet.
Attach an ISP or a printer hard disk.
Connect the printer to a network.
Attach a keyboard.
Connect the printer to a computer.
"Adding available options
39