Attendance Messages - Lexmark C920 Service Manual

5056-XXX

Attendance messages

Note: For more information on clearing paper jams, refer to
Message
Activating Menu Changes
All Photo Dev Life Warning
<bin name> Full
Black Photo Dev Life Warning
Busy
Calibrating
Cancel not available
Cancelling
Change <src> <Custom Type
Name>
Change <src> <Custom String>
Change <src> <size>
Change <src> <type> <size>
Check tray <x> connection
Clearing job accounting statistics
Close front door
Close side door
Close door <x> Check finisher
installation
Close tray <x> top cover
<Color> Low
2-30
Service Manual
"Clearing paper jams" on page
Meaning
The printer is activating changes
made to the printer settings.
All photodevelopers are nearing
the end of life and need replacing.
The specified bin is full.
The black photodeveloper is
nearing the end of life.
The printer is busy receiving or
processing print data.
The printer is calibrating.
The printer is processing a
request to cancel a job.
The printer is requesting a
different type or size of paper.
The printer cannot sense the
presence of a tray.
The printer is deleting all job
statistics stored on the hard disk.
The printer's front door is open.
The printers side door is open.
A door on the finisher is open.
The hi-cap feeder door is open.
The specified toner cartridge is
low.
3-34.
Action
Wait for the message to clear.
-Select Continue to clear the
message and print without replacing
the photodevelopers.
-Replace all photodevelopers.
Remove the stack of paper from the
specified bin to clear the message.
- Select Continue to clear the
message and print without replacing
the black photodeveloper.
- Replace the black photodeveloper.
Wait for the message to clear, or
cancel the print job.
Wait for the message to clear.
Wait for the message to clear.
Wait for the message to clear.
- Select Continue if you have
changed the media.
- Select Use current to print on
media currently in the printer.
- Cancel the current job.
Turn the printer off and back on. If
the error recurs, turn the printer off,
remove the specified tray, then
reattach the tray.
If the error recurs, turn the printer off,
remove the specified device, and call
for service.
Select Continue to clear the
message and print without using the
device.
Wait for the message to clear.
Close the front door to clear the
message.
Close the side door to clear the
message.
Close the finisher door to clear the
message.
Close the specified top cover to clear
the message.
-Select Continue to print without
replacing the toner cartridge.
-Replace the specified toner
cartridge.