Finisher Installation; Attaching The Docking Plate And Guide Rail - Lexmark C920 Service Manual

Color laser printer

Hide thumbs Also See for C920:

Table of Contents

Finisher installation

Lift the printer exit tray halfway and remove. You will need the tray when the finisher is attached.

Insert the docking plate tabs into the printer.

Align the thumbscrews on the docking plate with the holes in the side of the printer.

Tighten the docking plate thumbscrews.

Align the thumbscrews on the guide rail plate with the holes in the side of the printer cabinet or stand.

Service Manual