Lexmark C920 Service Manual page 74

5056-XXX
Message
Enter PIN
Enter PIN to lock
Error printing from USB drive
Error reading USB drive
Flushing buffer
Formatting Disk yyy%
DO NOT POWER OFF
Formatting Flash
DO NOT POWER OFF
Fuser Life Warning
Hex Trace
Hole Punch Box Full
Insert Staple Cartridge
Insert Tray <x>
Insert hole punch box
Install <device> or Cancel Job
Internal System Error
Reload Bookmarks
Internal System Error, Reload
Security Certificates
2-32
Service Manual
Meaning
The printer is unable to process a
job on a USB drive.
The printer cannot access the
USB drive.
The printer is flushing corrupted
print data and discarding the
current print job.
The printer is formatting the hard
disk. The percent complete is
displayed.
The printer is formatting the flash
memory.
The fuser is nearing the end of its
life.
The printer is in Hex Trace mode.
Self explanatory.
Staple cartridge is empty.
The specified tray is missing or
not fully inserted.
The hole punch box is missing or
not fully inserted.
The printer is requesting a
specified device be installed so it
can print.
Action
Enter the PIN you identified in the
driver when you sent the confidential
job to the printer.
Enter the correct pin number to lock
the operator panel and prevent menu
changes.
Wait for the message to clear.
Wait for the message to clear.
Wait for the message to clear.
Warning: Do not turn the printer off
while this message is displayed.
Wait for the message to clear.
Warning: Do not turn the printer off
while this message is displayed.
Wait for the message to clear.
-Select Continue to clear the
message and print without installing
a new fuser.
-Install a new fuser.
-Empty the hole punch box.
-Select Continue to clear the
message and print without using the
hole punch feature.
-Install a staple cartridge to clear the
message.
-Select Continue to clear the
message and print without using the
staple feature.
Insert the specified tray into the
printer.
-Install the hole punch box.
-Select Continue to clear the
message and print without using the
hole punch feature.
-Turn the printer off, install the
specified device, and restart the
printer.
-Cancel the current job.
-Reload the Bookmarks.
-Select Continue to clear the
message and continue printing.
-Reload the Security Certificates.
-Select Continue to clear the
message and continue printing.