To specify the font pitch for scalable monospaced fonts.
Values:
10.00*
Specify the value in increments of 0.01.
6.00-24.00
Font pitch refers to the number of fixed-space characters in a horizontal inch of type. For nonscalable monospaced fonts, the pitch is displayed, but cannot be
changed.
NOTE:
The Font Pitch menu is only displayed for fixed or monospaced fonts.
See also:
"Pitch and Point Size"
Form Line
Purpose:
To set the number of lines in a page.
Values:
1
64*
Specify the value in increments of 1.
5-128
1
*
Denotes country-specific factory default values.
The printer sets the amount of space between each line (vertical line spacing) based on the Form Line and Orientation menu items. Select the correct Form
Line and Orientation before changing Form Line.
See also:
"Orientation"
Quantity
Purpose:
To set the default print quantity. (Set the number of copies required for a specific job from the printer driver. Values selected from the printer driver always
override values selected from the operator panel.)
Values:
1*
Specify the value in increments of 1.
1-999
Hex Dump
Purpose:
To help isolate the source of a print job problem. With Hex Dump selected, all data sent to the printer is printed in hexadecimal and character representation.