Automatic Dialing; Speed Dialing; Storing A Number For Speed Dialing; Sending A Fax Using A Speed Dial - Dell 2135cn - Multifunction Color Laser Printer Troubleshooting Manual

Automatic Dialing

Speed Dialing

You can store up to 200 frequently dialed numbers in speed dial locations (001-200).
When the speed dial job specified in the delayed fax or redial exists, you cannot change the speed dial number from the operator panel or Dell Printer
Configuration Web Tool.

Storing a Number for Speed Dialing

1. Press until >FAX appears, and then press
2. Press until Add PhoneBook Entry appears, and then press
3. Press until >Speed Dial appears, and then press
4. Enter the three-digit speed dial number between 001 and 200, using the number keypad, and then press
5. Enter the settings for Name, and Phone Number by using
If a number is already stored in the location you chose, the display shows the number to allow you to change it. To start over with another speed-dial
number, press .
6. Enter the number you want to store using the number keypad, and then press
To insert a pause between numbers, press
7. To assign a name to the number, enter the name. For details about how to enter names, see
If you do not want to assign a name, skip this step.
8. To store more fax numbers, repeat steps 4 through 6.
To return to the standby mode, press

Sending a Fax Using a Speed Dial

1. Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass.
For details about loading a document, see
2. To enter the speed dial number do either of the following:
a. Press until >FAX appears, and then press
b. Press until Speed Dial appears.
c. Use the Keypad buttons to enter the three-digit speed dial number between 001 and 200, using the number keypad, and then press
The corresponding entry's name briefly displays. To confirm the name again, press
3. Adjust the document resolution to suit your fax needs (see
If you need to change the contrast, see "Lighter/Darker".
4. Press .
5. The document scans into the memory.
.
.
.
, and number keys.
. "-" appears on the display.
.
"Loading an Original Document".
.
"Adjusting the Document
.
.
"Using the Number Keypad to Enter
.
Resolution").
Characters".
.