Dell 2135cn - Multifunction Color Laser Printer Troubleshooting Manual page 33

Purpose:
To specify the fax settings.
Values:
Telephone
Fax*
Telephone/Fax
Receive Mode
Ans
Machine/Fax
DRPD
0-255
Auto Rec Fax
0*
0-255
Auto Rec
Fax/Tel
6*
0-255
Auto Rec
Ans/Fax
21*
Off
Low
Line Monitor
Medium*
High
Off
Ring Tone
Low
Volume
Medium
High*
PSTN*
Line Type
PBX
Tone*
Tone/Pulse Pulse(10PPS)
Pulse(20PPS)
3-255
Resend Delay
8*
0-13
Redial Attempts
3*
1-15
Redial Delay
1*
On
Junk Fax Setup
Off*
On
Remote
Receive
Off*
00-99
Remote Rcv
Tone
00*
On*
Fax Header
Off
Fax Header
30byte
Name
Fax Number 20byte
On
Fax Cover Page
Off*
Pattern 1-7
DRPD Pattern
Pattern 4*
Only On Error
Sent Fax Fwd On
Off*
Fax Fwd
50 byte
Number
On
Fax Fwd Print
Off*
Sets the default fax receiving mode to Telephone.
Sets the default fax receiving mode to Fax.
Sets the default fax receiving mode to Telephone/Fax.
Sets the default fax receiving mode to Ans Machine/Fax.
Sets the default fax receiving mode to DRPD.
Sets the interval at which the printer goes into the fax receive mode after receiving an incoming call in 0-255 seconds.
The default is 0.
Sets the interval at which the printer goes into the fax receive mode after the external telephone receives an incoming
call in 0-255 seconds. The default is 6.
Sets the interval at which the printer goes into the fax mode after the external answering machine receives an
incoming call in 0-255 seconds. The default is 21.
Turns off the volume of the line monitor, which audibly monitors a transmission through the internal speaker until a
connection is made.
Specifies the volume of the line monitor.
Turns the volume of the ring tone, which indicates that an incoming call is a telephone call through the internal speaker
when Receive Mode is set to Telephone/Fax.
Specifies the volume of the ring tone.
Sets the default line type to PSTN.
Sets the default line type to PBX.
Sets the dialing type to Tone.
Sets the dialing type to Pulse(10PPS).
Sets the dialing type to Pulse(20PPS).
Specifies the interval between transmission attempts within the range of 3 to 255 seconds. The default is 8 seconds.
Specifies the number of redial attempts to make when the destination fax number is busy, within the range of 0 to 13.
The default is 3.
Specifies the interval between redial attempts within the range of 1 to 15 minutes. The default is 1.
Rejects faxes sent from unwanted numbers by accepting faxes only from the fax numbers registered in the Phone Book.
Does not reject faxes sent from unwanted numbers.
Receives a fax by pressing a remote receive code on the external telephone after picking up the handset of the
telephone.
Does not receive a fax by pressing a remote receive code on the external telephone after picking up the handset of the
telephone.
Specifies the tone to start Remote Receive. The default is 00.
Prints the sender's information on the header of faxes.
Does not print the sender's information on the header of faxes.
Sets the sender's name to be printed on the header on faxes.
Sets the fax number of the printer, which will be printed on the header of faxes.
Attaches a cover page to faxes.
Does not attach a cover page to faxes.
Provides a separate number for faxing with a distinctive ring pattern. The default is Pattern 4.
Forwards the incoming faxes to a specified destination only when an error occurs.
Always forwards the incoming faxes to a specified destination.
Does not forward any of the incoming faxes to a specified destination.
Specifies the destination to which incoming faxes will be forwarded.
Prints all of the forwarded incoming faxes to the specified destination.
Does not print all of the forwarded incoming faxes to the specified destination.