Installing The Optional Memory Card - Dell 2135cn - Multifunction Color Laser Printer Troubleshooting Manual

Back to Contents Page
Installing the Optional Memory Card
Print and Check the System Settings Page
Updating your PCL Driver
This chapter describes how to install the printer's optional memory card.
Your printer supports 256 MB additional memory card.
1. Ensure that the printer is turned off.
2. Turn the screw on the memory cover in the counter-clockwise direction.
NOTE: Loosen the screw. You do not need to remove the screw.
3. Slide the memory cover towards the back of the printer.
4. Open the memory cover halfway until it stops, and then slide it again towards the back of the printer.
5. Open the memory cover completely.
6. Orient the connector of the memory card to the slot and insert the memory card into the slot.