Dell 2135cn - Multifunction Color Laser Printer Troubleshooting Manual page 235

DNS Domain Name
Get DNS Server
DNS Address from DHCP
DNS Server Address
WINS Mode
WINS Primary
WINS Server*2
WINS Secondary
Server*2
Connection Time-Out
LPD
IP Filter (IPv4)
Port Number
Port9100 Connection Time-Out
IP Filter (IPv4)
Port Number
Simultaneous
HTTP
Connections
Connection Time-Out
Address
IP Filter*1 Address Mask
Active Mode
1
* This item is only available for LPD or Port9100.
To configure the IP Filter feature, enter an IP address to be filtered in the Address field and the Subnet Mask in the Address Mask field. Enter a numeric value
between 0 and 255 in each field. "*" is appended to the current value.
Setup Procedure
You can set up to a maximum of five items and the first item set takes priority. When setting multiple filters, enter the shortest address first followed by a
slightly longer address, a longer address and so on.
The following section explains how the IP Filter operates.
1. IP Filter Procedure
a. Enabling Printing From a Specified User
The following describes the procedure to enable printing only from the "192.168.100.10" IP address.
Procedures:
i. Click the first column of the Access List row 1.
ii. Enter "192.168.100.10" in the Address field and "255.255.255.255" in the Address Mask field.
iii. Select Permit.
iv. Click Apply New Settings.
b. Disabling Printing From a Specified User
The following describes the procedure to disable printing only from the "192.168.100.10" IP address.
Procedures:
i. Click the first column of the Access List row 1.
ii. Enter "192.168.100.10" in the Address field and "255.255.255.255" in the Address Mask field.
iii. Select Reject.
iv. Click the first column of the Access List row 2.
v. Enter "0.0.0.0" in the Address field and "0.0.0.0" in the Address Mask field.
vi. Select Permit.
vii. Click Apply New Settings.
c. Enabling and Disabling Printing from Network Addresses
You can enable printing from the "192.168" network address and disable printing from the "192.168.200" network address.
The example below describes how to enable printing from the "192.168.200.10" IP address.
Sets the DNS domain name.
Allows you to enable or disable the automatic setting of the DNS server address via DHCP.
Manually sets the DNS server address in xxx.xxx.xxx.xxx format when Get DNS Server Address from DHCP is not
selected.
Allows you to enable or disable the automatic setting of the primary and secondary WINS server addresses via DHCP.
Manually sets the primary WINS server address in xxx.xxx.xxx.xxx format when WINS Mode is not selected.
Manually sets the secondary (backup) WINS server address in xxx.xxx.xxx.xxx format when WINS Mode is not
selected.
Sets the connection timeout period from 1 to 1000 seconds.
To set the IP Filter settings, click IP Filter (IPv4). The IP Filter (IPv4) page is displayed.
Sets the port number from 9000 to 9999.
Sets the connection timeout period between 1 and 1000 seconds.
To set the IP Filter settings, click IP Filter (IPv4). The IP Filter (IPv4) page is displayed.
Sets the port number to 80 or from 8000 to 9999.
Displays the maximum number of simultaneous connections.
Sets the connection timeout period from 1 to 255 seconds.
Sets the address in the address field. Enter a numeric value between 0 and 255 in each field of "aaa.bbb.ccc.ddd."
However, "aaa" cannot be 127 or 224-254.
Sets the Subnet Mask in the Mask field. Enter a numeric value between 0 and 255 in each field.
Sets whether to reject or permit printing from the specified network addresses, or disables IP filtering for the specified
addresses.