Checking The Shipping Container Contents - Cisco 7206VXR - VPN Bundle Router Configuration Manual

Checking the Shipping Container Contents

Checking the Shipping Container Contents

Once you receive your Cisco 7200 VXR router, use the following procedure to check the contents of the
shipping container. Use the
components you ordered.
Do not discard the shipping container. You need the container if you move or ship the Cisco 7200 VXR
Note
router in the future.
Verify that the following are included in the shipping container (the accessories box might be separate):
Step 1
•
•
Step 2 Check the contents of the accessories box against the
slip to verify that you received all listed equipment, which should include the following:
•
•
•
•
Note
Verify that the port adapters installed in your Cisco 7200 VXR router match the port adapter types on
Step 3
the packing list.
Proceed to the
Step 4
Router,"
Cisco 7200 VXR Installation and Configuration Guide
2-12
Cisco 7200 VXR Component List
One Cisco 7200 VXR router, fully assembled (except the rack-mount and cable-management kit)
One or more accessories boxes (some or all may be shipped separately)
One modular power cable for each AC-input power supply
One rack-mount and cable-management kit (four brackets and 14 mounting screws)
Optional equipment that you ordered, such as network interface cables, transceivers, or special
connectors
Cisco 7200 VXR router hardware and software documentation, if ordered
We no longer ship the entire router documentation set automatically with each system. You must
specifically order the documentation as part of the sales order. If you ordered documentation and
did not receive it, we will ship the documents to you within 24 hours. To order documents,
contact a customer service representative.
"Site Log" section on page
to begin the installation.
in Table 2-3
Cisco 7200 VXR Component List
2-13, and then to Chapter 3, "Installing a Cisco 7200 VXR
Chapter 2 Preparing for Installation
to ensure you received all the
and the packing
OL-5013-09