Unpacking And Verifying Shipping Contents; Checking The Shipping Container Contents - Cisco ASR 1001-HX Hardware Installation Manual

Unpacking and Verifying Shipping Contents

Unpacking and Verifying Shipping Contents
When you receive your chassis, perform the following steps and use the shipping contents checklist in the
following section.
Procedure
Step 1 Inspect the box for any shipping damage. (If there is damage, contact your Cisco service representative).
Step 2 Unpack the Cisco ASR 1001-HX Router or Cisco ASR 1002-HX Router.
Step 3 Perform a visual inspection of the chassis.
Step 4 After you have unpacked the system, verify that you have received all of the required components, including
all the accessory items. Using the packing list as a guide, verify that you have received all the equipment listed
in your order, and ensure that the configuration matches the packing list.

Checking the Shipping Container Contents

Use the components list shown in the following table to check the contents of the Cisco ASR 1001-HX Router
Cisco ASR 1002-HX Router shipping container. Do not discard the shipping container. You need the container
if you move or have to ship the Cisco ASR 1001-HX Router or Cisco ASR 1002-HX Router in the future.
Table 12: Cisco ASR 1001-HX Router and Cisco ASR 1002-HX Router Shipping Container Contents
Component
Chassis
Accessories Kit
Note
ESD, Wrist Strap (disposable)
Cisco ASR 1001-HX Router and Cisco ASR 1002-HX Router Hardware Installation Guide
46
Description
Cisco ASR 1001-HX Router and Cisco ASR 1002-HX Router are
configured with dual AC or dual DC power supplies and an EPA and
NIM blank panel if an EPA or NIM has not been ordered.
Front and rear chassis rack-mount brackets that you will attach to the
chassis with the respective screws
You must order the
Accessories Kit separately
Three sets of screws, one each for:
if you order the Cisco
ASR 1001-HX Router or
Cisco ASR 1002-HX
Router chassis as a spare.
Two cable-management brackets with U-feature design devices attached.
1 RJ-45 to RJ-45 crossover cable
1 RJ-45 to DB-9 (female) adapter
One disposable wrist strap
• Front rack-mount brackets (use the black screws)
• Rear rack-mount brackets (use the package with the 5 screws)
• Cable-management brackets (use the package with the 4 screws)
Preparing Your Site for Installation