Cisco 7206VXR - VPN Bundle Router Configuration Manual page 147

Chapter 4 Observing System Startup and Performing a Basic Configuration
Step 6 For the following queries, do not enable VINES, LAT, DECnet, CLNS, bridging, XNS, or Apollo:
Configure Vines? [no]:
Configure LAT? [no]:
Configure DECnet? [no]:
Configure CLNS? [no]:
Configure bridging? [no]:
Configure XNS? [no]:
Configure Apollo? [no]:
For the following queries, enable routing on AppleTalk and IPX:
Step 7
Configure AppleTalk? [no]: yes
Multizone networks? [no]: yes
Configure IPX? [no]: yes
In most cases you use IP routing. If you are using IP routing, you must also select an interior routing
Step 8
protocol. You can specify only one of two interior routing protocols to operate on your system using the
setup facility: Interior Gateway Routing Protocol (IGRP) or Routing Information Protocol (RIP).
To configure IP routing, enter yes (the default) or press Return, and then select an interior routing
protocol:
Configure IP? [yes]:
Configure IGRP routing? [yes]:
The following sample display includes a continuous listing of all configuration parameters selected in
Step 3
Configuring global parameters:
Enter host name [Router]: router
The enable secret is a one-way cryptographic secret used
instead of the enable password when it exists.
Enter enable secret: barney
The enable password is used when there is no enable secret
and when using older software and some boot images.
Enter enable password: betty
Enter virtual terminal password: fred
Configure SNMP Network Management? [yes]:
Community string [public]:
Configure Vines? [no]:
Configure LAT? [no]:
Configure AppleTalk? [no]: yes
Multizone networks? [no]: yes
Configure DECnet? [no]:
Configure IP? [yes]:
Configure IGRP routing? [yes]:
Configure RIP routing? [no]:
Configure CLNS? [no]: n
Configure bridging? [no]:
Configure IPX? [no]: yes
Configure XNS? [no]:
Configure Apollo? [no]:
OL-5013-09
Your IGRP autonomous system number [1]: 15
through Step 8. Only IP, IPX, and AppleTalk are the selected protocols for this example.
Your IGRP autonomous system number [1]: 15
Configuring a Cisco 7200 VXR Router
Cisco 7200 VXR Installation and Configuration Guide
4-7