Chapter 3
Installing a Cisco 7200 VXR Router
Figure 3-1
1
Rack posts
2
18.31 in. (46.48 cm) hole center-to-center
3
110 VAC outlets
If you want the port adapter end (the front) of the chassis recessed in the rack, install the rack-mount
brackets at the front or rear of the chassis in the orientation shown in
of the chassis protruding from the rack, install the rack-mount brackets at the front or rear of the chassis
in the orientation shown in
OL-5013-09
Typical Four-Post Equipment Rack Posts and Mounting Strips
2
4
5
Figure
3-3.
1
3
4
Mounting strips
5
17.00 in. (43.18 cm) minimum
Cisco 7200 VXR Installation and Configuration Guide
Rack-Mounting a Cisco 7200 VXR Router
Figure
3-2. If you want the front
3-3