Chapter 3
Installing a Cisco 7200 VXR Router
Figure 3-7
1
Step 5
Repeat Step 1 through Step 4 for the other rack-mount bracket and cable-management bracket (if
required).
This completes the procedure for installing the rack-mount and cable-management brackets on a
Cisco 7200 VXR router for a front rack-mount configuration.
Installing the NPE-G1 and NPE-G2 Cable-Management Brackets on a Front-Mounted Router
You can install Cisco 7200 VXR routers standard cable-management brackets or an optical cable-
management bracket on the NPE-G1 or NPE-G2.
•
•
OL-5013-09
Installing the Rack-Mount Brackets on the Front of the Chassis so the Front
Is Recessed in the Rack
Cisco 7200
Series
1
Rack-mount bracket
To install the standard cable-management brackets on a Cisco 7200 VXR router with an NPE-G1 or
NPE-G2 installed, see the
To install the optical cable-management bracket on an NPE-G1 or NPE-G2 in a Cisco 7200 VXR
router, see the
"Installing the NPE-G1 and NPE-G2 Optical Cable-Management Bracket" section on
page
3-11.
2
2
"Installing the Cable-Management Brackets" section on page
Cisco 7200 VXR Installation and Configuration Guide
Rack-Mounting a Cisco 7200 VXR Router
ETHERNET-10BFL
FAST ETHERNET INPUT/OUTPUT CONTROLLER
Cable-management bracket
3-15.
3-9