Input/Output Controller C7200-I/O-Fe Leds - Cisco 7206VXR - VPN Bundle Router Configuration Manual

Chapter 1 Cisco 7200 VXR Product Overview
Table 1-28
LED
100 Mbps
LINK

Input/Output Controller C7200-I/O-FE LEDs

Figure 1-25
MII receptacle and an RJ-45 receptacle (C7200-I/O-FE), and
I/O controller model. Also see
OL-5013-09
C7200-I/O-2FE/E I/O Controller LEDs
Color Function
Green Indicates that the port is configured for 100-Mbps operation (speed 100),
or if configured for autonegotiation (speed auto), the port has detected a
valid link at 100 Mbps.
If the port is configured for 10-Mbps operation, or if it is
Note
configured for autonegotiation and the port has detected a valid
link at 10 Mbps, the LED remains off.
Green Indicates that the Ethernet/Fast Ethernet RJ-45 receptacle has established
a valid link with the network. This LED remains off during normal
operation of the router unless there is an incoming carrier signal.
shows the LEDs on the I/O controller with the Fast Ethernet port that is equipped with an
Table 1-24
Table 1-29
for LEDs common to all I/O controllers.
Cisco 7200 VXR Installation and Configuration Guide
Field-Replaceable Units
lists the LEDs specific to this
1-45