Cisco 7206VXR - VPN Bundle Router Configuration Manual page 108

Rack-Mounting a Cisco 7200 VXR Router
Figure 3-10
1
1
Rack-mount bracket
Figure 3-11
1 Rack-mount bracket
Thread two M4 x 8-mm Phillips flathead screws through the rack-mount bracket and into the side of the
Step 3
chassis. Use a number 2 Phillips screwdriver to tighten the screws.
Repeat
Step 4
If you plan to include the cable-management brackets in your rear rack-mount configuration, align the
Step 5
first cable-management bracket to the threaded holes in the front side of the chassis. (See
and Figure
Step 6 Thread two M4 x 8-mm Phillips flathead screws through the bracket and into the chassis. Use a number
2 Phillips screwdriver to tighten the screws.
Repeat Step 5 and Step 6 for the other cable-management brackets.
Step 7
Cisco 7200 VXR Installation and Configuration Guide
3-12
Installing the Rack-Mount Brackets on the Rear of the Chassis so the Front
Protrudes from the Rack
Cisco 7200
Series
2
Installing the Rack-Mount Brackets on the Rear of the Chassis so the Front
Is Recessed in the Rack
1
Cisco 7200
Series
2
Step 1 through Step 3 for the other rack-mount bracket.
3-11.)
Chapter 3 Installing a Cisco 7200 VXR Router
ETHERNET-10BFL
FAST ETHERNET INPUT/OUTPUT CONTROLLER
2
Cable-management bracket
ETHERNET-10BFL
FAST ETHERNET INPUT/OUTPUT CONTROLLER
2 Cable-management bracket
Figure 3-10
OL-5013-09