Health Indicator Codes - HP EX470 - MediaSmart Server - 512 MB RAM Installation And Troubleshooting Manual

Health Indicator Codes

The Tables below are a breakdown of the Health indicator displays. To see this code, using a paper clip, press and release the
recessed Status/Recovery button on the front of the server..
Table 2: Health indicator codes Codes when the indicator starts as Solid red
Question/Issue
Solid red—no code
1 blue, 2 red
1 blue, 3 red
1 blue, 4 red
1 blue, 5 red
1 blue, 6 red
44 Chapter 5
Probable Cause
Operating system or
application error.
System drive failed to
boot.
Operating system USB
boot failed.
Recovery mode failed.
Multiple boot failure.
Service code.
Answer/Resolution
See Windows Home Server Console for error condition.
If the light-bar for the system drive (the lowest light-bar) is also red, you
need to replace the system hard drive.
Check that lowest USB port on back of server has boot source.
Contact HP Support at http://www.hp.com/support.
Contact HP Support at http://www.hp.com/support.
Do not hold state button longer than 3 seconds. Shut down and
repeat.